Improve process reliability with the Softcontrol-V/UE Blend water hardness monitor. Engineered for continuous monitoring of blended water, the system uses selective calcium and magnesium ion sensing to provide accurate hardness measurement without chemical consumables.
Operators can easily configure upper hardness limits and alarm delays to match application requirements, while integrated USB logging stores measurement history and device status for maintenance and compliance reporting.
Suitable for all types of water blending systems, the Softcontrol-V/UE delivers precise, low-maintenance water hardness monitoring with reduced operating costs and environmentally friendly operation.
| Wall Mounted | 400 x 250 x 160 mm (W x H x D) |
|---|---|
| Weight | Approx 8 kg |
| Surrounding Temperature | 5 °C … 50 °C |
| Relative Humidity | 20 % … 80 % |
| Power Supply | 100 … 240 Volt / 50 … 60 Hz |
| Power Consumption | 15 V DC, about 20 Watt |
| Raw and Blended Water Connection | Branch pipe with connection for PA-tube o.d. 4 mm, i.d. 2 mm, up streamed dirt filter ≤ 0,1 mm recommended |
| Raw and Blended Water Pressure | Minimum 1 bar up to maximum 10 bars |
| Drain | Minimum ø 15 mm, pressure free |
| Quality of Raw and Soft Water | Natural water, free of grease, oil and brine germ content < 5000 CFU/ml |
| Hardness Range Raw Water | 0.72 ppm 32.4 ppm |
| Possibility of Calibration Input Actual Value of Blended Water Hardness | 0.2 ppm 10,8 ppm |
| Setting of Threshold Value | 0.2 ppm 10,8 ppm |
| Sensor Control | Automatic |
| External Signaling | Potential-free contacts (sensor alarm, threshold value alarm) 4 … 20 mA current loop, paramterisable |
| Operation Time of Sensor | Approx. 6 to 9 months |


